Surge protection for LED lighting

There are more than 300 million streetlights in the world with a majority still using traditional high-pressure sodium lamps. Conversion to LED will significantly reduce the two biggest cost drivers in street lighting, maintenance and energy consumption.

These benefits are achieved by using a combination of components including a lighting control board, LED driver and LED array that are more sensitive than their predecessors to common electrical disruptions such as lightning, switching events and power line disturbances.

It is critical to deploy a surge mitigation strategy that minimizes the risk of exposure, maximizes protection of key system components and removes as much situational uncertainty as possible.

Typical application points include,

MLPXU-277L-W-HE

UL TYPE 4CA - Imax 22kA - In 10kA

OR

M50-277Y-A

UL TYPE 1 SPD - Imax 50kA - In 20kA - AC Panel Mount

DLA-48D3

UL121201 Hazardous Locations- In 5kA

SPD FOR DATA NETWORK

SPD for LED street light

OR

SPD FOR STREET CABINET

MLPXUVG-277S

LED SPD - Imax 20kA - In 10kA - 120-277Vac 2 wire + ground

MLPXUVG-277S

LED SPD - Imax 20kA - In 10kA - 120-277Vac 2 wire + ground

SPD FOR STREET LIGHTING POLE BOX

MJ8-C6A

SPD for Architectural outdorr lighting

DS74US-277Y/G

UL TYPE 1 SPD - Imax 75kA - In 20/30kA - Modular Assembly

MLPC1-277L-V

UL TYPE 4CA - Imax 22kA - In 10kA

OR

Download Brochure
Surge Protection for LED Lighting